Construction of the sofas: its importance in padding

The structure of the sofa and the general construction of the furniture is a very important factor in upholstery and upholstered furniture. Most people look at a padded sofa or armchair and do not see what is downstairs. The same is true of a human being. An individual's external appearance is determined by the muscles that are under the skin. These muscles are not stronger than the bone structure upon which everything else is built.

The skeleton of a sofa or chair is its wooden frame. Here, we discuss traditional furniture, not objects made of tubular steel and synthetic foam pads. The frame of a sofa must be solid to withstand the stresses and strains involved when used. For a sofa to be comfortable, it must be able to tolerate these stresses without sinking.

Furniture construction: the sofa joint

What applies to the frame of a sofa also applies to a chair. The sofa frame must be made of solid wood. The tree must not be so hard that it cannot accept blue padding. Frames that come with nails or glue tend to be weak and have a limited lifespan. The strongest wood sofas are constructed using traditional joining techniques.

The main rectangular frame must be designed with thick solid wood beams joined in each corner with slats and pointed joints. Butt joints reinforced with pins will eventually separate and dovetail joints are not suitable for this type of thick frame. The wood must be thick for two reasons: (a) it must support the weight of the people sitting on the couch; and (b) it must offer a solid base to secure the strap that holds the springs and tires.

The sofa frame acts as the skeleton of the entire sofa and supports the seat, backrest and arms. It is often made of oak or occasionally a dense form of soft wood, such as certain pine trees. This frame is the most important aspect of furniture design.

Sofa seat

The sofa seat traditionally rests on a woven fabric layer. Strips of 2 "or 5mm wide upholstery tape adhere to the side, front and back frames and are woven longitudinally and lengthwise. The lengths are attached to the frame with st inch upholstery sockets.

Helical steel springs are bonded to the belt using a padding rope. The upper parts of the springs are connected by sections of the padding rope attached to the top of each spring. Each spring is tied to its neighbor using the same length of thread. They are bonded in eight ways and connect all the springs and thread sections together with the side, rear and front rails on the couch Sofa Repair in Dubai .

Then place a canvas cover over the springs, stretch and glue on the side rails. Then add the fill and fill layers followed by another layer of canvas to hold everything together. Finally, the top cover of the padding extends and is secured to the side rails.

Now you can see the importance of furniture design and why the sofa arm rails should be so strong and well articulated. They hold every layer of the seat, including the springs, and have a large number of adhesives padded within them. The rails must support the weight of at least two people or even more for a larger sofa.

Rear sofa

At one point, the back of the couch was built and upholstered in exactly the same way as the seat, but with shorter springs. To save time, a box spring construction is now used. The springs are held in a metal frame that is nailed to the rear frame. This method can be used because the backrest has less weight to support than the seat.

Padding layers are added and glued to the back as normal. The rear frame does not have to be as strong as the seat, and the wood used is generally of smaller dimensions in every way. However, the joints from the back to the seat and the arms must be strong to prevent the back frame from collapsing.

Summary

The frame of a sofa must be made of strong and thick wooden beams and cross bars. They need to be properly connected by slats and tip joints because they have a lot of weight to support and also a large number of padding cords to accommodate. The wood may not be too soft, otherwise the pins will not hold, nor too hard, or the pins will not be able to penetrate. Oak, cherries and certain pines are fine.