How to Build Your own Barbecue

Building Your Own Barbecue

Most people really like barbecues.

Getting outside while in the good weather, cooking food over a flames, discussing the day with family and friends - what’s not to really like?

And the nice thing is, it takes just a couple of hours to create yourself a good bbq that can be fired up year after year, giving you a center point for the entertaining.

A visit to a Do-it-yourself Shop gives you all of the items you’re going to need.

Schedule a day (or two if you need to level a piece of your garden), and get to work.

Any time you’re stoking up the coals and the burgers are on the barbeque grill, your work will certainly all seem beneficial!

What You’ll Require

Bricks, sand, cement
Bbq grill set
Spirit level
Shovel and trowel
Plank of wood
Masking Tape

Best places to Site A person's Bbq

Locate a flat area away from your home, outbuildings, trees and shrubs, as well as other structures.

Gas Barbeque smoke may drift in through open windows so attempt to position it so this won’t be considered a problem.

Don’t overlook your neighbors - they might not really appreciate your barbecue smoke billowing over their particular wall so think about the breeze and also which position would be better as a measure to reduce this.

Construct on a Flat Surface

The simplest way to make sure of a flat surface is always to construct your Barbeque on a previously level courtyard or back yard area.

If you want to site it on lawn, you’ll need to dig it out, fill it with stones and then cover the hole with paving or concrete.

Use your spirit level to guarantee it is completely level.

If it isn’t, make use of a layer of your concrete to even it out.

How big a Charcoal Barbeque?

How big your bbq will really hinge on the size of the grill you select.

After you’ve acquired your barbeque grill, rest it on the flat location you’re site the actual Barbeque on.

Place a single layer of the bricks around the grill - building a U-shape around three edges and leaving the front clear.

Mark the outer edge and the the inside edge of the stones with masking tape.

This will be your guideline when laying the actual bricks and mortar.

Remove the layer of stones and put them back with the rest.

Getting going

Blend the sand and cement as per the manufacturer’s instructions.

Spread evenly the first level of mortar on the ground using the masking tape as the guideline.

Position the bricks on the mortar, leaving ½ inch gap between each brick for additional mortar.

Check the level again and ensure that the corners are at right angles.

The Height of the Barbecue

Because you’re the main one who’s probably be doing the actual barbecuing, use your height to evaluate how high the actual Barbeque should be.

Arrange for the grill/grate supports to be about waist height - that’ll save you bending too much while you Gas Barbecue.

Layer the actual Stones

Lay the bricks, starting at the corners.

Stagger the second layer - this can be achieved through cutting and using half stones at the ends and full bricks in the middle.

Once you’ve laid four or five courses of stones - staggered each time lay a length of wood across from one side to the other and use spirit level to check they are continue to be level to each other.

Next use the spirit level vertically to check that the sides are upright.

Any variance in height ought to be equalized out using mortar.

Continue adding the stones and mortar until you’ve laid six or seven courses or are near your waist height.

On the left-hand and right-hand sides of the walls as you face the barbecue, move the stones sideways so that they make a support for the grilling holder, jutting out from the rest of the wall.

Measure the width of your grill again to make certain that it’s going to fit.

lay an additional three rows and turn the bricks sideways once again - on this occasion so that they will support the grill tray.

Add two more layers of bricks and mortar and you’re done!

Finishing Details

Go around the walls of the bbq, taking off the rugged mortar edges.

You can do this as you go along utilizing a short length of hosepipe and dragging it along each of the horizontal and vertical joints.

If you possess the. room, bricks and inclination, you could extend the brickwork out to the left or right of your barbecue to create a table top, using a paving slab as the work surface.

After you’ve constructed your bbq, dust off any brick dust with a soft bristled brush or paintbrush.

Do this carefully and thoroughly

You’ll have to leave the bbq for at least three days prior to using it as the mortar needs this amount of time to set and dry.

Once you’ve waited three days, you’re all set, so telephone your friends and family , head to the grocery store and get ready to savor the fantastic outside with your recently built barbecue.

Bon appetite!